The procedure for preparing the lifeboat gravity (gravity davit)

In preparing a lifeboat, at least very dependent on the type of "Goddess Goddess" and the lifeboat equipment and the location and placement of the goddess goddess on deck.

Aboard the lifeboat with Dewi Dewi Using gravity (Gravity David), implementation consists of 6 people ABK:

Step 1

Check and remove the Harbour Safety Pins

Step 2

Remove the lasing / grips lifeboat and Check Triggers

Step 3

Check the retaining strap (Tricing Pendants)

Step 4

Brake Handle with lift, arm Lani leave, along with the lifeboat, after arm out the maximal Dewi Dewi, lifeboat lopor block regardless of the hook end of the goddess goddess, then lifeboat in the "area" to the embarkation deck.

Step 5

Attach Boswing Tackle and close to the lifeboat hull

Step 6

Remove Tricing Pendants (by releasing Pelican Hook)

Step 7

ABK immediately rose / get into a lifeboat, sits in a low and quiet

Step 8

Tackle Boswing area, remove it from the block lopor rope and throw to ship

Step 9

Lower the lifeboats until the surface of the water, watch the waves

Step 10

Remove the rope ganco lopor (Hook Falls), heed in Aft or simultaneously and immediately attach the rudder and tiller (Rudder and Trailler)

Step 11

Remove / disconnect the strap peg catch (Taggle Painter), then pull the rope catch to give pace to the lifeboat, lifeboat dihaluan Ganco officials immediately rejected the stairs or the hull so that the lifeboat is free of the hull

Step 12

Rowing lifeboat away from the ship or avoid suction when the ship "Drowning", note the tidal currents and floating anchor (Sea Anchor), then wait for assistance / help

At the time of the implementation of the reduction should lifeboat crew led by senior and assisted by the crew who had been appointed earlier.

If you want to raise the lifeboat in its original position, then this work is conducted in accordance with the reverse order.